Support road.cc

Like this site? Help us to make it better.

BUYER'S GUIDE

Shimano Tiagra v Shimano 105 R7000 — see which popular groupset is best for you

Find out how Shimano's 10-speed Tiagra and 11-speed 105 groupsets compare

If you’re choosing between Shimano Tiagra and Shimano 105 – either fitted to a complete bike or as an upgrade on an existing bike – here’s everything you need to know to make the right decision.

  • The biggest difference between Shimano Tiagra and Shimano 105 is that Tiagra has 10 sprockets on the rear wheel, 105 has 11 for closer-ratio gearing

  • Both Shimano Tiagra and Shimano 105 use the same ratio of gear cable pull to rear derailleur movement, so you can fit a 105 derailleur in  Tiagra system if you want to

  • While bikes with Shimano Tiagra are usually substantially cheaper than those equipped with 105, the margin between the cost of components is often a lot smaller

  • Tiagra is the highest-grade Shimano groupset that still offers a triple chainset for fans of super-wide-range gear systems

  • Overall, a Shimano Tiagra groupset is quite a bit heavier than a 105 groupset, but almost 200g of the difference is in the chainset

  • Want to know which 11-speed groupset to go for? Check out our comparison of Shimano 105 v Shimano Ultegra

A groupset is a component manufacturer’s collection of mechanical parts, usually covering the derailleurs, shifters, brakes, chainset, bottom bracket, cassette and chain. Brands group these parts into various different levels.

If you want to know more about what a groupset is, check out our beginner’s guide.

Shimano offers six road groupsets. Starting at the top these are:

• Dura-Ace
• Ultegra
• 105
• Tiagra
• Sora
• Claris

Plus, Dura-Ace and Ultegra are available with Di2 electronic shifting, and Dura-Ace, Ultegra and 105 are also available with hydraulic disc brakes, and Shimano offers both hydraulic and cable discs for Tiagra

The recommended retail price of a complete Shimano Tiagra groupset (chainset, shifters, derailleurs, chain, cassette, brakes, bottom bracket) is £500 or £450, depending which retailer you choose to believe. A Shimano 105 R7000 groupset is nominally £596. That’s a difference of £96-£146.

However, both groupsets are widely available heavily discounted. You can pick up a Tiagra group for about £300, and 105 R7000 for as little as £400, though cheap deals like that usually don't offer the full range of chainring, cassette and crank length options.

Read more: Complete guide to Shimano groupsets

The biggest difference between the groupsets is that 105 – which is the most popular groupset in the world, according to Shimano – is 11-speed (there are 11 sprockets on the cassette) whereas Tiagra is 10-speed.

Tiagra is offered with both a double chainset (there are two chainrings) and a triple chainset (there are three chainrings) whereas 105 comes as a double only.

A number of technologies have filtered down to 105 R7000 from the more expensive Ultegra and Dura-Ace groups and Tiagra components are a little heavier. As ever, you pay more for lighter weight.

Read our full Shimano 105 R7000 groupset review.

Read our full Shimano Tiagra 4700 groupset review.

Dual control levers (mechanical)

  Weight RRP Online price
Tiagra 493g (pair) £224.99 £157.50
105 476g (pair) £214.99 £214.99

The main difference between the dual control levers is that Tiagra (below) is a 10-speed system and 105 is 11-speed.

Shimano-Tiagra-4700---STI-lever

In both cases the bracket is made from GFRP (glass-fibre reinforced plastic), the main lever is aluminium, and you get screw-operated reach adjustment to bring the levers closer to the handlebar for smaller hands.

Gear shifting on the Shimano 105 R7000 group is light and snappy, a significant improvement on the previous 105 iteration. Shimano has captured the very light lever action of Ultegra and Dura-Ace and brought it down to a cheaper price.

105 R7000 brifters

Tiagra has cables that are routed underneath the handlebar tape like the higher level Shimano groupsets, a feature that was a long time coming to the budget groupset.

When we reviewed Tiagra we said, “Shift feel is perhaps a little heavier than Dura-Ace or Ultegra, but that's an unfair criticism given the huge price difference.”

Unlike 105, Tiagra is available with a triple chainset (with three chainrings rather than two, see below). If you want to go down that route you’ll need to buy the compatible dual control levers.

Dual pivot brakes

  Weight RRP Typical price
Tiagra 360g (pair) £62.98 (pair) £39.98 (pair)
105 388g (pair) £95.98 (pair) £73.98-£87.98 (pair)

One of the biggest differences between 105 and Tiagra is the braking performance.

Shimano 105 R7000 brake calipers

Shimano calls its latest calliper design SLR-EV Dual Pivot and this is now found on 105 (above), Ultegra and Dura-Ace. The new symmetrical twin pivot design equalises the braking forces through each arm for better control and power.

Slowing rather than stopping can be achieved with just a couple of fingers applying pressure to the lever and it's easy to avoid locking a wheel. The brake pad compound feels a little more grippy than the previous version in both wet and dry conditions.

Shimano Tiagra 4700 brake caliper.jpg

The latest Tiagra brakes (above) do provide more stopping ability than before but they aren’t a patch on 105. The brakes will certainly stop you in a hurry, they're just lacking in feel and feedback through the levers.

The one-piece brake blocks also exhibit some flex, and changing them isn't as simple as swapping a brake pad in more expensive cartridge brakes such as those found on 105 and Ultegra.

Shimano says both 105 and Tiagra have room for tyres up to 28mm wide. However, the latest 105 R7000 brakes have slightly more drop (the distance from the mounting bolt to the brake pads) than before: 51mm v 49mm. That implies you should be able to run 30mm tyres with the right frame.

105 is also available in a direct mount option (you need to have a compatible frame and fork) where the brake arms bolt straight on to the frame/fork rather than via a central bolt. There is no Tiagra direct mount option.

Disc brakes

  Weight RRP Online price
Tiagra hydraulic NA £469.98 £375.98
105 NA £539.98 £539.98

The 105 hydraulic STI units for disc brakes are 11-speed, as you'd expect, while the Tiagra are 10-speed. The new 105 R7000 STI units are considerably streamlined compared to both their predecessors and the Tiagra versions.

Riders with small hands should definitely look to the R7000 brakes. The ST-R7025 levers sit closer to the handlebar than the standard ST-R7020 levers.

105 R7000 hydro brifters

We've been impressed with the Tiagra hydraulic discs. They were fitted to the Genesis Datum 10 that Mike Stead tested in mid-2017, and he commented: "I'm rapidly coming to the conclusion that Shimano can do no wrong brake-wise, the performance being consistently excellent across all specs from base model non-series to Dura-Ace. Stopping power is enhanced by the use of a 160mm rotor up front, meaning there's never any need for more than two fingers on the levers, even with hands on the hoods let alone in the drops." The Tiagra brakes specifically boosted the Datum 10's performance downhill: "the wide tyres and hydraulic brakes give you the confidence to bomb rough-tarmac descents without fear."

Shimano Tiagra disc brakes.jpg

Chainset

  Weight RRP Typical price
Tiagra 910g (50-34 tooth) £114.99 £99.99
105 716g (50-34 tooth) £154.99 £120.99

Shimano Tiagra (below) and 105 each feature chainsets with aluminium crank arms and a steel axle. They both use a four-arm spider with uneven spacing between those arms, the idea being to provide strength and stiffness where it’s needed while keeping the weight low.

Shimano Tiagra 4700 chainset triple.jpg

The outer ring in both cases is aluminium/GFRP. Again, the design is intended to provide stiffness.

Both 105 and Tiagra are available in 165mm, 170mm, 172.5mm and 175mm crank lengths. Diminutive riders can also choose a 160mm 105 R7000 crankset

Chainring options are slightly different. With 105 you can decide between 53-39, 52-36 and 50-34 tooth setups but Tiagra lacks the traditional, racing-orientated 53-39 option.

On the other hand, Tiagra is available in a triple chainset configuration: 50-39-30. You’ll need a triple-compatible left hand shifter and front derailleur as well.

All 105 (below) and Tiagra chainsets use the same bolt circle diameter (BCD, 110mm) so it’s easy to swap from one size of chainring to another.

Shimano 105 R7000 chainset

As commenters have pointed out, the 105 chainset is significantly lighter than the Tiagra, but is reported to work fine in an otherwise Tiagra set up, so if you have a Tiagra bike, a 105 is a worthwhile upgrade.

Front derailleur

  Weight RRP Typical price
Tiagra 106g £35.99 £17.99
105 109g £38.99 £29.00

The 105 (below) and Tiagra front derailleurs are made from the same materials – aluminium with a chrome plated stainless steel chain guide – and each comes in braze on and band on varieties to suit different frames.

Shimano 105 R7000 front mech

The differences are that the 105 front derailleur is suitable for 11-speed use and a large chainring of between 46 and 53 teeth while the Tiagra one (below) is 10-speed compatible and takes a large chainring of between 46 and 52 teeth. (If you want to use a chainring larger than 53-teeth, Shimano says you have to go all the way up to a top level Dura-Ace front derailleur). You can also get a Tiagra front derailleur that’s suitable for use with a triple chainset.

The two derailleurs have very different appearance because the 105 R7000 uses what Shimano calls a "compact toggle design". This design — previously seen on Dura-Ace and Ultegra — increases tyre clearance and provides a cable tension adjustment screw in the body of the derailleur.

Shimano Tiagra 4700 front mech.jpg

We found the Tiagra front derailleur to shift cleanly, smoothly and quietly, even under load.

Rear derailleur

  Weight RRP Typical price
Tiagra 277g (long cage) £35.99 £32.00
105 220g (short cage), 227g (long cage) £51.99 £48.00

Following the design of the Ultegra R8000 rear derailleur launched the year before, the 105 R7000 is a radical departure from previous 105 derailleurs and looks very different from the Tiagra unit. The 105 R7000 derailleur uses the Shadow design Shimano originally developed for mountain bikes to tuck the derailleur in to the bike and increase the largest sprocket it can handle.

The Tiagra version is designed to be used as part of a 10-speed setup while the 105 version is designed for 11-speed. Each is made with a bracket body, plate body and plates made from aluminium.

Shimano 105 R7000 rear mech GS

Both Tiagra and 105 rear derailleurs come in short cage and long cage versions for use with different cassettes. The short-cage Tiagra derailleur can handle up to a 28-tooth large sprocket, while the 105 R7000 equivalent can shift up to a 30-toother. The long cage versions will both handle a 34-tooth sprocket, though we've found the long-cage version of the 105 R7000 will actually shift all the way to a 40-tooth chainring without any hassle at all.

Shimano Tiagra 4700 rear mech mid cage.jpg

When we reviewed Tiagra we said, “Shimano says it has revised the cable pitch on the rear derailleur (above), claiming it now offers 'precise and long-lasting shifting performance'. It's certainly living up to those claims compared with old Tiagra.”

Cassette

  Weight RRP Typical price
Tiagra 308g (12-28) £34.99 £37.00
105 284g (11-28) £51.99 £46.80 - £52.20

The Tiagra and 105 cassettes both feature nickel plated steel sprockets although the 105 version has an a spider arm and a lockring made from anodised aluminium and it’s considerably lighter. The biggest difference, though, is that a 105 cassette is 11-speed while a Tiagra one is 10-speed.

105 is available in 11-25, 11-32 and 12-25 tooth options, plus a newly-introduced 11-34 that will fit on a 10-speed wheel, while Tiagra comes in 11-25, 12-28, 11-32 and 11-34 tooth.

Shimano CS-HG700 11-34 cassette

When he reviewed the previous Shimano 105 Stu said, “Resistance to wear has always been a reason for me to buy 105 sprockets even with an Ultegra or Dura-Ace equipped bike, and that remains here as the nickel-plated sprockets are standing up to pretty much anything you can throw at it.

“The shifting is sharp and those computer designed tooth profiles must be doing their job as even under load there were no missed shifts.”

Tiagra 10-speed cassettes are currently very hard to find. The link above goes to an 11-25 cassette. If you need the opposite end of the scale, you can use an SLX 11-34 10-speed for £44.00.

Chain

  Weight RRP Typical price
Tiagra 273g (114 links) £22.99 £17.18
105 257g (114 links) £32.99 £22.55

The 105 chain (below) is 11-speed rather than 10-speed, so it’s narrower and a little lighter than the Tiagra version.

Shimano 105 - chain.jpg

They both run very quietly thanks to Sil-Tec (PTFE) coated links.

Bottom bracket

  Weight RRP Typical price
Tiagra 92g (threaded), 71g (press-fit) £20.99 £19.99
105 77g (threaded), 69g (press-fit) £32.99 £23.99
Shimano 105 - bottom bracket.jpg

The Tiagra press-fit bottom bracket is nearly as light as the 105 version. Although the threaded model is quite a bit heavier than the 105 one (above) in percentage terms, you’re still only talking about 15g, and that’s negligible considering the overall weight of your bike. That said, for the tiny increment in typical price, the BB-R60 (105) is also used in the Ultegra groupset and has an excellent reputation for durability.

Conclusion

Tiagra is a really impressive groupset. It does everything you want from a mid-level road bike with only a few minor quibbles. The biggest decision is whether you're really fussed about having the 11-speed of Shimano's more expensive 105.

If you go for Tiagra you can’t upgrade to 105 one component at a time because 10-speed and 11-speed drivetrain components aren’t interchangeable. You’d have to upgrade most of the groupset components at once for optimum performance. As well as an 11-speed cassette having an extra sprocket, the spacing between those sprockets is smaller, an 11-speed chain is narrower than a 10-speed chain, and, obviously, an 11-speed shifter has one more position than a 10-speed one. However, you should be able to put a 105 rear derailleur in a Tiagra system as the cable pull ratios are the same, but to go to 11-speed you're eventually going to need the big bang of new sprockets, chain and shifters.

If you go for 105, on the other hand, you could swap to Ultegra or Dura-Ace gradually as each component wears out. That might be attractive, but only if you’re realistically likely to do this.

If you want really low gears, 105 is the better choice. In theory both systems will handle a 34-tooth largest sprocket, but while we've heard of people persuading Tiagra to cope with a 36-tooth, we have direct experience of a long-arm 105 mech cheerfully shifting to a 40-tooth sprocket.

The other major difference between the two groupsets is that the 105 brakes are considerably better than Tiagra ones. They are a real highlight both in terms of all-out power and fingertip control.

Tiagra offers excellent value for money but 105 is certainly the better groupset and we’d recommend going for it if your funds allow because of the better brakes, the small weight saving and the upgrade to 11-speed.

Explore the complete archive of reviews of groupsets on road.cc

About road.cc Buyer's Guides

The aim of road.cc buyer's guides is to give you the most, authoritative, objective and up-to-date buying advice. We continuously update and republish our guides, checking prices, availability and looking for the best deals.

Our guides include links to websites where you can buy the featured products. Like most sites we make a small amount of money if you buy something after clicking on one of those links. We want you to be happy with what you buy, so we only include a product if we think it's one of the best of its kind.

As far as possible that means recommending equipment that we have actually reviewed, but we also include products that are popular, highly-regarded benchmarks in their categories.

Here's some more information on how road.cc makes money.

You can also find further guides on our sister sites off.road.cc and ebiketips.

road.cc buyer's guides are maintained by the road.cc tech team. Email us with comments, corrections or queries.

Mat has been in cycling media since 1996, on titles including BikeRadar, Total Bike, Total Mountain Bike, What Mountain Bike and Mountain Biking UK, and he has been editor of 220 Triathlon and Cycling Plus. Mat has been road.cc technical editor for over a decade, testing bikes, fettling the latest kit, and trying out the most up-to-the-minute clothing. We send him off around the world to get all the news from launches and shows too. He has won his category in Ironman UK 70.3 and finished on the podium in both marathons he has run. Mat is a Cambridge graduate who did a post-grad in magazine journalism, and he is a winner of the Cycling Media Award for Specialist Online Writer. Now over 50, he's riding road and gravel bikes most days for fun and fitness rather than training for competitions.

Add new comment

44 comments

Avatar
PpPete | 3 years ago
0 likes

I'd certainly dispute this sentence:

"That said, for the tiny increment in typical price, the BB-R60 (105) is also used in the Ultegra groupset and has an excellent reputation for durability."

The units themselves are very little more expensive, but you need to buy a whole new tool to fit them/remove them unless you are lucky enough to find a retailer shipping with an adapter to convert from the original HTII standard used in the Tiagra.    And IME the durability of the BB-R60 is not on a par with Tiagra (which itself is not great).  500km including a couple of wet rides on a BB-R60 and its FUBAR.  Get the Tiagra BB if you are on a budget, or get spendy with a Hope BB or maybe an ACROS

 

Avatar
Secret_squirrel replied to PpPete | 3 years ago
1 like

Or buy the adapter seperately.  Its £4.

Avatar
AidanR | 3 years ago
0 likes

As Vanilla Bikes is no longer trading, you should probably remove affiliate links to their website.

Avatar
Hardyards | 4 years ago
0 likes

Does anyone know if the Tiagra hydraulic brifters would work with the br-ur300 flat mount disc brakes? 

My bike has Tiagra 4700 10 speed componentry throughout, but looking to convert from flatbar to dropbar (the geometry between this bike is very nearly identical to the similar model dropbar). 

From what I can tell the shifting, hydraulic lines and everything should be the same but not sure if there is a difference in cylinder capacities or anything that would stop the brifters working with the calipers. 

Avatar
Secret_squirrel replied to Hardyards | 3 years ago
0 likes

Cant say 100% for sure but generally speaking all Shimmy disc brakes are interchangable - even between road and mountain.   So I'd say almost certainly.  The only recommendation I have seen is to also swap out the road hose for the MTB hose if you want road brifters to MTB calipers.  Even then I would guess they still work but you lose a little feel.

Avatar
earth | 4 years ago
1 like

Listened to a shop assistant in Evans today telling someone how Tiagra was more reliable than 105 because it was heavier and therefore stronger.  I've had both and Tiagra started to wear out much quicker than 105.  

Avatar
froze replied to earth | 3 years ago
0 likes

I would have to agree with Earth about this, I have a friend who bought a Tiagra equipped bike back in 2014, I bought a 105 equipped bike in 2013, I ride more than he does yet he's already had to replace both briftors with 105 because one broke, and then due to compatibility issues he had to replace the derailleurs and went with 105. 

That's the problem with Tiagra, Sora, and Claris is that you can't upgrade if you have Tiagra to say 105 without replacing the whole transmission system, so it's wiser just from that standpoint alone to go with 105.

I noticed the article didn't mention Shimano's lowest end group, Tourney, did Shimano stopped making that group?

Avatar
Vickramrk | 4 years ago
0 likes

Hi, I've just moved to Dublin and I'm looking to make a purchase using the cycle to work scheme.  I booked the Giant Contend sl2 2019 model which has the Tiagra, however after seeing this post I'm confused if Ishould rather go in for the Contend SL1 which has the 105s?  I am a beginner rider who has been doing some weekend rides on an old Fuji road bike.  But I am looking to ride long term and so would like a bike that would be a keeper for atleast 3-5 years, I also have fitness goals which translated from running into cycling as running took a toll on my knees.  I would get a 1000 Euros from the cycle to work scheme and I migth be able to put in another 400 euros for accessories etc. so I'm not too sure if it's worth going in for a SL1(105) which would cost 1200 euros or the SL1 for 1050 Euros (with the Tiagras).

Avatar
jollygoodvelo replied to Vickramrk | 4 years ago
0 likes
Vickramrk wrote:

Hi, I've just moved to Dublin and I'm looking to make a purchase using the cycle to work scheme.  I booked the Giant Contend sl2 2019 model which has the Tiagra, however after seeing this post I'm confused if Ishould rather go in for the Contend SL1 which has the 105s?  I am a beginner rider who has been doing some weekend rides on an old Fuji road bike.  But I am looking to ride long term and so would like a bike that would be a keeper for atleast 3-5 years, I also have fitness goals which translated from running into cycling as running took a toll on my knees.  I would get a 1000 Euros from the cycle to work scheme and I migth be able to put in another 400 euros for accessories etc. so I'm not too sure if it's worth going in for a SL1(105) which would cost 1200 euros or the SL1 for 1050 Euros (with the Tiagras).

Honestly, I'd stick with Tiagra.  Spend the difference on some good quality tyres, a track pump and so on.

Avatar
Vickramrk replied to jollygoodvelo | 4 years ago
0 likes
jollygoodvelo wrote:
Vickramrk wrote:

Hi, I've just moved to Dublin and I'm looking to make a purchase using the cycle to work scheme.  I booked the Giant Contend sl2 2019 model which has the Tiagra, however after seeing this post I'm confused if Ishould rather go in for the Contend SL1 which has the 105s?  I am a beginner rider who has been doing some weekend rides on an old Fuji road bike.  But I am looking to ride long term and so would like a bike that would be a keeper for atleast 3-5 years, I also have fitness goals which translated from running into cycling as running took a toll on my knees.  I would get a 1000 Euros from the cycle to work scheme and I migth be able to put in another 400 euros for accessories etc. so I'm not too sure if it's worth going in for a SL1(105) which would cost 1200 euros or the SL1 for 1050 Euros (with the Tiagras).

Honestly, I'd stick with Tiagra.  Spend the difference on some good quality tyres, a track pump and so on.

Thanks for the response, any suggestions on the tyres? 

Avatar
jollygoodvelo replied to Vickramrk | 4 years ago
0 likes
Vickramrk wrote:

Thanks for the response, any suggestions on the tyres? 

I'm a big fan of Vittoria (Rubino Pro or even Corsa, with the G+ graphene), Continental's GP5000 is another very popular option.

Avatar
kil0ran | 5 years ago
0 likes

Is it possible to use 105 5800 levers with Tiagra 4700 mechs (and a ten speed cassette)?

Limit screws would deal with the extra click potentially?

Avatar
Dnnnnnn replied to kil0ran | 5 years ago
1 like
kil0ran wrote:

Is it possible to use 105 5800 levers with Tiagra 4700 mechs (and a ten speed cassette)?

Limit screws would deal with the extra click potentially?

I'm not sure that would work well - although I don't have direct experience.

A 10sp lever pulls 2.8mm cable per click and the actuation ratio of a 10spd rear mech is 1.4, so the chain is pulled ~3.92mm (the sprocket pitch).

The figures for 11spd are 2.7mm x 1.4 = ~3.78mm pitch. The mech ratio is the same 1.4 but the shifter is pulling less cable, so the chain movement is less.

So it looks like you'll pull 3.78mm when you really want 3.92mm on a 10 spd cassette (the pitch tables say 3.74mm and 3.95mm - presumably due to rounding effects)

So you're shifting >5% too little each shift. Probably hardly noticeable for one click but after several (even if you centre on the middle sprocket so you can only underpull 5 times in either direction)....

I'm not sure. I've bodged plenty things to an adequate standard before - if you're buying relatively expensive new kit it's nice if it works sweetly! Keep the mech but change the cassette (and chain) for 11spd items?

https://en.wikibooks.org/wiki/Bicycles/Maintenance_and_Repair/Gear-chang...

 

Avatar
kil0ran | 6 years ago
1 like

Article needs updating to feature the redesigned 105 front mech which is now similar to DA/Ultegra - low profile so no issues with the arm hitting mudguards, Allen head limit screws, inline cable tension adjuster, and no need to do that fiddly eyeballing of which way the converter pin should be set. Probably the best £30 upgrade you can buy, and compatible with 4700 too.

Avatar
kil0ran | 6 years ago
0 likes

4700 levers work absolutely fine with 105 calipers. Excellent feel and response, perfectly able to haul my considerable bulk up on a sixpence, even with caliper brakes. Check the compatibility chart on si.shimano.com - when 5800 was released it didn't work with 4600 levers as the pull ratio was different, that's changed and everything from 4700 up uses the same ratio now. Agreed that shouldn't affect braking.

Avatar
jaysa replied to kil0ran | 4 years ago
0 likes
kil0ran wrote:

4700 levers work absolutely fine with 105 calipers. Excellent feel and response ...

confirm that. My daily came with Tiagra 4700, swapped the calipers to 105, rear derailleur to Ultegra and the crankset to Campy Comp Ultra Overtorque, bought for silly money in a sale. All works fab, saves about 380g in all.

Avatar
don simon fbpe | 6 years ago
0 likes

Looking at a caliper upgrade and have come a cross this.

Quote:

The Shimano 5800 has gone 11 Speed for the latest incarnation of the 105. The 5800 has been inspired by the innovations of the more upper end Shimano Ultegra and Dura Ace; you can see the technological influences across the design of the 5800 components.  More advanced and lighter than its predecessors and with a more eye catching design, the 5800 promises high performance and is one of the latest cycling must haves. 

Specifications:

Enhanced brake arch proportions give a quicker linear response and increased power
Must be used in conjunction with ST-5800, ST-6800 or ST-9000 STIs for correct leverage ratio
Dual-pivot calliper brake with super SLR-EV design for quick linear response, increased rigidity and improved braking power
Low profile outer cable stop position improves cable routing for reduced friction
Cartridge brake shoes for easy replacement
Convex washers on the brake shoes offer toe-in brake adjustment and easy alignment
Lightweight aluminium construction, with an anodised finish to preserve the good looks
Compatible with 28c tyres
49 mm drop

What the hell?

Does mean that they will not function with 4700 levers?

I don't understand where the leverage ratio comes in to the degree that the brakes won't work, and thus must be used with...

Nor what the number of gears has to do with brake calipers.

 

#Shitmano

Avatar
kil0ran | 6 years ago
0 likes

In the last two years I've gone from Ultegra Di2 to 105 and now a mix of 105 & Tiagra on both bikes. Tiagra shifters and mechs are proving to be utterly reliable and were easy to set up. Unless you need 11 speeds, go with Tiagra and spend the difference on top quality finishing kit.

Avatar
barbarus | 7 years ago
1 like

Shimano have done a good job with the colour of the tiagra stuff though. Squint, and it could be ultegra.

Avatar
stenmeister | 7 years ago
1 like

The Shimano website here shows you what is compatible between various generations of 105 and Tiagra.

 

http://productinfo.shimano.com/#/com/

Avatar
fixit | 7 years ago
0 likes

tiagra 4700 series 10sp shifters and deraileurs have totaly diferent shift-pull ratio than other road shimano 10sp systems. be aware of that. you cannot use tiagra 4700 shifters with an 105 or ultegra 10sp deraileur, nor 105 or ultegra shifters of 10sp with the tiagra 5700 10sp deraileurs. shimano has changed the ratios on the 11sp shifters to be more presice and it has moved this to the tiagra line. if you want to go inexpensive, go for  new tiagra 10sp not 105 10sp. 

Avatar
Vejnemojnen | 7 years ago
0 likes

my grief if the lack of cassette choice.

 

a 13-25 or 13-26 would be very good imho, the smaller the increments are, the better. campag has very good ratio 10 speed cassettes, whereas shimano forces this ridiculous trend with 11-12t starting cogs, which are mostly left untouched by free-time weekend warriors 99% of the time..

Avatar
pockstone | 7 years ago
0 likes

Thanks Disfunctional T... & RW, I'll keep an eye on the shifting. Seems OK on the bike stand but past experience tells me that 'on the road' is adifferent matter. It's a  Shadow mech and the angle of the cable already looks a bit contorted when attached to below the pinch bolt. 

Thanks for the hanger advice also. My knees may well appreciate 40 teeth.

Avatar
Woldsman replied to pockstone | 7 years ago
0 likes
pockstone wrote:

Thanks Disfunctional T... & RW, I'll keep an eye on the shifting. Seems OK on the bike stand but past experience tells me that 'on the road' is adifferent matter. It's a  Shadow mech and the angle of the cable already looks a bit contorted when attached to below the pinch bolt...

I have what is mainly a 10sp triple Shimano 105 setup (5703) and a Shimano XT Shadow 9sp (M772) rear derailleur on my 'winter' bike.  In my experience it shouldn't require any special contorting at the pinch bolt (the so-called 'hubhub' method?) and the only adaptation I've had to make is to cut the cable outer to insert a Jagwire inline adjuster as this particular model of rear mech does not have a barrel adjuster.

If you don't mind my suggestions perhaps it is worth looking first at replacing the inner cable as it's the cheapest thing to do, then if that doesn't work maybe having the rear mech hanger alignment checked. (On my olde worlde 10sp Ultegra (6700) bike I replaced both the rear mech and hanger and was never satisfied with the shifting.  I eventually bought a Park Tool DAG2.2 and straightened the hanger.  Even with brand new rear mech and hanger the alignment had been some way out.  Just a thought.)

(And as a further aside on the 105 v Tiagra discussion - I bought a friend the 5800 calipers and fitted them on her bike as her mainly 4700 setup came with Tektro (?) calipers that weren't up to much.  Apart from some initial faffage with the ferrules everything worked fine together. 'New Super-dooper SLR' or whatever.)

 

Avatar
pockstone replied to Woldsman | 7 years ago
0 likes

Quote: 'I have what is mainly a 10sp triple Shimano 105 setup (5703) and a Shimano XT Shadow 9sp (M772) rear derailleur on my 'winter' bike.  In my experience ...'

Thanks Woldsman.

Tidy job.

Cable was replaced quite recently and has been working fine since.

I have a barrel adjuster on the down tube so, with careful pretensioning of the cable, I've been able  to adjust the indexing with travel to spare in the event of stretch.

The outer cable at the rear mech needs shortening so when I do that I'll introduce an adjuster as you have. (I can't help but notice that you have a bit of a long loop at the back too! Possibly to accommodate the adjuster?)

When did it all become so complicated?!!!

Avatar
caaad10 | 7 years ago
0 likes

"if you go for 105, on the other hand, you could swap to Ultegra or Dura-Ace gradually as each component wears out. That might be attractive, but only if you’re realistically likely to do this."

In theory, then yes - but in reality by the time anything actually starts to wear out Ultegra and Dura Ace will probably  have made some sort of change that makes it impossible, like going to 12 speed for example. One of of the reasons I chose my old bike was because the 105 was 10 speed, like Ultegra and Dura Ace of the same period.

Avatar
ianmoss | 7 years ago
0 likes

Just a note un 'mix and match.

I replaced the long cage Tiagra 4700 with a shortcage, and went for the 105 10 speed (5700) which you would think would be a straight swap... It's not.

I couldn't get the shifting / indexing right.

When I researched the issue, people were saying that the whole mecahnicals of the shifter (cable pull) and the motion of the RD were the same as 5800 and 6800. So if you plan on a swap, ignor the 'speed' of the parts and go for the latest generation.

It would seem that the base mechanicals of the shifters internals are the same as 105 and Ultagra but with 10 clicks instead of 11...!!!

I must say, I was sceptical of the tiagra being the 'lower' range of croupset, but that was the option of the BMC in my prefered colour came in. (more of a decision on the great frame than the whole bike package) It has been flawless, all summer, I did change the brake pads for the latest cartridge inserts though, much better!

Avatar
Vejnemojnen replied to ianmoss | 7 years ago
0 likes
ianmoss wrote:

Just a note un 'mix and match.

I replaced the long cage Tiagra 4700 with a shortcage, and went for the 105 10 speed (5700) which you would think would be a straight swap... It's not.

I couldn't get the shifting / indexing right.

 

 

no offence, but it was obvious fact since the 47.. came out, that it uses a different actuation ratio as that of older 10 spd components.

 

so I do not even get, why did you even try to do such a mix. A 11spd 5800 derailleur works well with 4700 shifters, but it is well known, that older 10spd components are with a different ratio (shorter cable pull-larger actuation ratio of the derailleur)

 

why did you even try to mix the 47xx with SiS (1.67 ratio) components?

 

edit: just look at side-by-side comparison pictures of older (sis-ratio) derailleurs and the new-line 9000-6800-5800-4700 rds. they hardly have any resemblance in terms of fixing bolt position compared to pivot bolts, and their side plates differ as well.

 

nb: the new sora r3000 actually is still with the old actuation ratio, therefore, you can use older shimano rear derailleurs with the new concealed-cable sora shifters without any issues.

Avatar
StraelGuy | 7 years ago
0 likes

I have the 5800 cranks and the teeth aren't hollow. The big ring is a 3D forging and there is a ring of hollow dimples around the inside edge below the teeth to save weight.

Avatar
pockstone | 7 years ago
0 likes

Are the latest Tiagra rear derailleurs compatible with 105 (5700) 10 sp. shifters? (And vice versa, ie are new Tiagra shifters OK to work with a 5700 105 derailleur?)

 My plan to increase the size of my cassette to 32 teeth got very complicated when I was informed that Tiagra had a different cable pull to 105. Phase 1 saw me making do with 30 teeth which works  fine with the 105 mech( despite it having a nominal maximum of 28 teeth).

Phase 2 paired a 9 spd Alivio MTB mech. with a 34 tooth cassette. Not really a success but that may have been down to a cable kink problem.

Phase 3 swapped the Alivio for a Deore XT mech. which seems to work much more smoothly. (Not actually ridden it further than round the block yet.)

Unfortunately I can foresee a Phase 4 when the 105 shifters give up the ghost. Will I be able to replace them with new Tiagra shifters and be able to swap between the XT and 105 mechs as the mood takes me? Or is the 'revised cable pitch'  a bit of built in obsolescence?

Pages

Latest Comments